SAS Longline Light Strike Vehicle
On Sale - Normal availability | �Permalink to K175
Customers who purchased this item also purchased these quality products from Accurate Armour
7.62mm Ammo Boxes (loose SLR)
A set of 30x resin 1/35th scale ammunition boxes for 7.62mm loose SLR ammunition, designed by Tim Babb. (These boxes are also used for many other ammo types including 0.50 Cal M2, and for general tools stowage etc) I have one in my garage, it contains all my small spanners
British Bergans, Bedrolls, Helmets
A comprehensive 1/35th resin scale set containing 6x Bergans (2x each with 3x levels of packing), 6x rolled bedrolls and 6x Infantry helmets (3 with goggles). A very useful stowage set for all Modern British Vehicles and dioramas, designed by Phil Hendry
UK MoD Jerry Cans 1964 onwards
This 1/35th scale resin accessory set contains 12 UK produced MoD style “Jerry Cans”. They depict cans produced after 1964, and have an assortment of UK date stamps on them
UK Cam Nets Post WW2 NEW
This 1/35th scale etched brass set comprises a pair of standard issue UK Post WW2 camouflage net panels. In 1/35th scale they measure 53mm x 105mm each (6’ x12’ full size, or approximately 1.6m x 3.6m). They are supplied as unpainted flat brass etchings
Centurion AVRE 165 (Gulf War)
During the Gulf War (Operation Granby) in 1990-1991 the Centurion AVRE 165 was expected to lead the assault of fixed Iraqi defences. The principle weapon was still the very destructive and accurate 165mm Demolition gun, however the vehicles were up-armoured with both steel, passive and reactive armour, and also fitted with new smoke dischargers. Some also carried the MIMIC electromagnetic mine detonation system. This vehicle was retired from service in 1992 and was not used in Operation Telic
Bedford MK/MJ 4-Tonne G.S. (Early)
This 1/35th Scale all resin full kit was researched and designed by David Jane and Rob Tearle. The Bedford MK 4-Tonne 4x4 entered service in 1969 and gradually replaced the Bedford RL in British Army service, and along with the later engined MJ model from 1977 onwards, became the most numerous medium truck in British Army service in modern times. Adopted by many other armies around the world and in later civilian ‘after-life’, to say that it’s been
SAS Land Rover 110 DPV
This 1:35th scale resin and etched brass kit by Rob Tearle depicts for the first time an authentic Land Rover 110 SAS Desert Patrol Vehicle during Operation Telic, fitted with GPMG and Grenade Launcher. The model features an all new pre-assembled resin chassis and full suspension, engine and transmission details. The kit features the special vehicle modifications and built in equipment particular to this vehicle and typical to similar vehicles used by the SAS. Full armament of
Series-III 109 Helicopter Support Platform
This 1/35th scale resin model kit by Rob Tearle depicts the Series-III 109 Inch wheelbase Helicoper Support Platform use in support of UK helicopters such as the LYNX.The simple to assemble model comes complete with pre-assembled chassis, engine and suspension details. An etched brass detail set and decals for general, GW1 and RAF use are also included, as are full illustrated instructions
The Longline Light Strike Vehicle (LSV) was born out of an Urgent Operational Requirement (UOR) for a fast lightweight strike platform for use behind enemy lines. Built and tested in the run up to the 1991 liberation of Kuwait for the purposes of ‘Scud Busting’ deep behind enemy lines.
Designated Ground Mobile Weapon Platform (GMWP) by the MOD the LSV was a tubular space frame vehicle with torsion bar suspension derived from Volkswagen parts. Powered by a 1.9 ltr petrol engine of flat 4 configuration and rear mounted for low centre of gravity and handling.
Mk1 vehicles were rear wheel drive, Mk2 (only 5 produced) were 4 wheel drive and Mk3 were 4 wheel drive with a re-designed rear end build around a 1.9ltr VW TDI diesel engine tilted to one side to reduce its overall height.
In practice the vehicle was found to lack the carrying capacity for long range desert operations and after the conflict the vehicles were passed on to 24 Air Mobile Brigade where full road legal lights were added as well as strengthening the frame and up-rating the suspension.
This kit covers only the 2 wheel drive SAS variant as tested at the time of the Gulf War. This vehicle had a crew of 2 sitting in fibre glass bucket seats and had a .50 cal HMG fitted in a Vinghog soft mount.
Designed by Rob Tearle, this kit is our first to have been almost entirely designed in a digital format allowing us to 3D print highly detailed and robust masters. Many thanks to Tim Perry for his boundless enthusiasm for good design and all things 3D printed and to Ian Young who’s brilliantly preserved vehicle was made available for us to research.