AA products / Decals, Diorama & Photo-etch

From vehicle related Decal sheets to generic sets, Diorama accessories and photo-etched detailing.

D22
£11.00

A large and very thin etched sheet (3.5” by 5.25”) of 1/35th scale tread plate suitable for flooring vehicles, machines, walkways and other general modelling uses

D23
£5.50

An etched set of 1/35th scale hand tools, with gloves and a mechanics tool box/tray with handle

D24
£13.00

A 1/35th scale light duty manually operated chain hoist set with ecthed frame, resin working parts and two sizes of operation/lifting chain

D25
£4.50

A 1m (39”) length of very fine solder, (approximately 0.4mm (0.016”) in diameter. The ideal material to form into cables/ thin hoses for general modelling use

D26
£4.50

A 1m (39”) length of flexible PVC (Rubber style) chord, which is ideal for simulating hydraulic pipes, particularly if the parts are to move

D27
£4.50

A set of Etched Numbers and Letters for general use or for adding casting/foundry marks to cast armour on AFV models

D28
£6.50

A set of Etched Numbers and Letters for general use or for adding casting/foundry marks to cast armour on AFV models

D29
£6.50

A set of Etched Numbers and Letters for general use or for adding casting/foundry marks to cast armour on AFV models

D30
£6.50

An extensive set of 1/35th scale padlocks for general modelling and for securing locker catches etc on Trucks, AFV’s.This super value set contains 60 each of 2 types of padlock (120 in total

D31
£6.50

An extensive set of 1/35th scale vehicle camouflage or stowage strap tie downs in a variety of styles (160 in total

D32
£4.50

An etched set with a useful assortment of etched straps for general tool and equipment stowage on military vehicles and heavy guns

D33
£15.00

The largest 1/35th scale Pressed Steel Planking (PSP) set on the market, and it actually joins properly! This design by Rob Tearle contains 12 scale 9’ sections, and comes with full illustrated instructions

D36
£4.50

300mm of flexible nitrile rubber chord suitable for use in any scale as a large flexible hose. In 1/35th scale this would be suitable for 2” hose for water and fuel.Other sizes are available, and can also be bought as sets with resin couplings and valves (see D39 to D41)

D37
£4.50

300mm of flexible nitrile rubber chord suitable for use in any scale as a large flexible hose. In 1/35th scale this would be suitable for 3” hose for water, fuel, and suction.Other sizes are available, and can also be bought as sets with resin couplings and valves (see D39 to D41)

D38
£5.50

300mm of flexible nitrile rubber chord suitable for use in any scale as a large flexible hose. In 1/35th scale this would be suitable for 4” hose for water, fuel, and suction.Other sizes are available, and can also be bought as sets with resin couplings and valves (see D39 to D41)

D39
£11.00

A 1/35th scale water fire hydrant set with font, base and ‘T’ bar, couplings, and 300mm of 1.6mm rubber chord (2” scale in 1/35th).Extra chord is available in 3 sizes as D36-D3

D40
£11.00

A water/fuel hydrant set with 2 sets of bases and valves, couplings, and 300mm of 2.4mm rubber chord (3” scale in 1/35th, but can be used in any scale).Extra chord is available in 3 sizes as D36-D3

D41
£11.00

A water/fuel hydrant set with 2 sets of bases and valves, couplings, and 300mm of 2.4mm rubber chord (4” scale in 1/35th, but can be used in any scale).Extra chord is available in 3 sizes as D36-D3