AA products / Fortification Products

1:35th and 1:76th scale Military bunkers, obstacles and fortifications

FF35019
£17.00

A 1/35th scale British WW-2 Anti-Invasion concrete Anti-Tank obstacle set in polyurethane resin.This set depicts Anti-tank Cubes (5 foot cubed) Qty-2 off. The castings have a realistic concrete shuttering texture. They are suitable for use in both inland and coastal scenes, at the side (or on) roads, or in the countryside.(The Bedford OYD Armadillo Mk-III is shown for scale

FF76001
£8.50

A set of 6 resin 1/76th scale super-detailed anti-invasion obstacles with optional concrete leg weights. Typical use was on the Atlantic Wall

FF76002
£8.50

A set of 6 1/76th scale interlocking Tetrahedra obstacles, which were very common throughout N.W.Europe, particularly on the Atlantic Wall

FF76003
£8.50

A set of 4 resin 1/76th scale super-detailed anti-invasion log beach obstacles with optional Tellermines. Typical use was on the Atlantic Wall

FF76004
£8.50

A set of 16 1/76th scale log beach posts with Tellermine-43 Anti-Tank mines fixed to the top of each post. A very common arrangement on the D-Day beaches

FF76005
£8.50

A set of six 1/76th scale German WW-II concrete Jack obstacles. These were used both on the invasion beach area, and further in land, particularly in towns around important buildings

FF76006
£8.50

A set of 5 resin 1/76th scale super-detailed AFmW42 fortress Flamethrowers & 32 Tellermines. Typical use was on the Atlantic Wall, West wall and on the perimeter of any German Military fortified position

FF76007
£8.50

A set of five 1/76th scale Nussnackermine anti-landing obstacles, which were universal throughout the invasion beaches. Landing craft and small boats moving the large girder detonated a mine housed inside the concrete ‘box’

FF76008
£17.00

A pair of 1/76th scale Anti-tank sea wall sections 29cm (11.4”) long (Scale 23 metres ~75 feet) which are part of our modular coastal defence system. The castings have a realistic concrete shuttering texture. (Figure and obstacle not included, they are shown for scale

FF76009
£17.00

1/76th scale Anti-tank sea wall sections 29cm (11.4”) long (Scale 23 metres ~75 feet) which are part of our modular coastal defence system. This section has been demolished in the centre to allow vehicles to pass, and a set of castings forming blown off parts is included. All parts have a realistic concrete shuttering texture. (Figure and obstacle not included, they are shown for scale

FF76010
£17.00

A pair of 1/76th scale Anti-tank sea wall corner sections 25cm (10”) long which are part of our modular coastal defence system. One internal, and one external corner group is included. The castings have a realistic concrete shuttering texture. (Figure and obstacle not included, they are shown for scale

FF76011
£8.50

A set of 6x 1/76th scale German WW-II steel Girder Tetrahedra obstacles. These were pre-fabricated in local workshops throughout occupied Europe

FF76012
£27.50

A set of 1/76th scale integrated ‘West Wall’ Typ-M1939 dragons teeth anti-tank obstacles with foundation bars by Derek Hansen. They are arranged in a set pattern, and the set can be extended by adding more sections. This is the correct system…not a set of individual pyramids! An integrated road barrier is also avaiable as FF76013. The figure is shown for scale only, and is not included

FF76013
£27.50

This resin and metal road barrier by Rob Tearle, integrates with products FF76012 Dragons Teeth (M1939) and forms a complete West Wall movable road barrier, connection parts for adjacent dragons teeth sets are included, and the girders are cast in metal. The figure is shown for scale only, and is not included

FF76014
£84.50

This joint 1/76th scale WW2 Atlantic Wall project with Fine Cast Models of Germany, depicts the massive Ex Gneisenau Battlecruiser turrets emplaced as Battey Fjell (MAA 11/504) and battery Öerlandet (MAA 4/507) in Norway during WW2.Each turret mounted three 28cm (11 inch) SK C/34 Guns housed on top of five level deep underground bunkers which have all the magazines and ammunition handling equipment usually found in a large ship.This resin and etched brass model kit was designed and produced by

FF76015
£9.50

A very simple to use etched brass set, with ten 1/76th scale barbed wire panels combined with mounting posts and extra strands of barbed wire. Beware when using, as it works like the real thing

FF76016
£13.00

A 1/76th scale Fortress concrete sentry box with an Officer figure plus a guard figure with dog. The sentry box has an interior with fortress telephone. This type of box was used at the entrances to fortified areas such as infantry strongpoints and gun batteries etc

FF76017
£13.00

A 1/76th scale model of the standard Tobruk Stand (Type-58c) of which over 10,000 were distributed on the Atlantic Wall alone. This model comes with interior detail, MG and rotating shield and Fortress Telephone