Vallejo Airbrush Thinner is formulated specifically for Model Air (VMA) and liquid acrylic without loss of adhesion, resistance and consistency. Supplied in a 32ml plastic bottle with eye dropper top for easy application.

A free MODEL Color and MODEL Air colour chart is available from us with any order, just ask for one in the order comments box.

This set contains one 60ml bottle of Plast-I-Weld clear welding adhesive. This is the ideal set for the assembly of any styrene or ABS plastic injection model kit or scratchbuilding product.

Note:-This product is for plastic-to plastic welded bonding; for plastic-to-resin or plastic-to-metal a suitable Super-glue should be used for permanent fixing.

This item provides spill free filling of your Touch-N-Flow applicator.

The applicator specially designed for precise control of liquid solvent and Cyanoacrylate activator. (Not for Cyanoacrylate Glue)

XTRACRYLIX paint is a water based non-toxic, non-flammable acrylic designed for application by brush. Each colour comes in a 16ml plastic screw top bottle.

All Colours can be easily mixed and diluted using VMD thinner/dilutant. They may also be diluted for spray application.

To order, select the colour from the drop-down, add a quantity then add to basket.

An Acrylic Medium to improve the flow & delay the drying of paint on the airbrush needle.

Vallejo recommends 1-2 drops Flow improver to every 10 drops of paint in the airbrush cup.

An Acrylic Medium to improve the flow & delay the drying of paint on the airbrush needle.

Vallejo recommends 1-2 drops Flow improver to every 10 drops of paint in the airbrush cup.

An Acrylic Medium to improve the flow & delay the drying of paint on the airbrush needle.

Vallejo recommends 1-2 drops Flow improver to every 10 drops of paint in the airbrush cup.

Vallejo Airbrush Thinner is formulated specifically for Model Air (VMA) and liquid acrylic without loss of adhesion, resistance and consistency. Supplied in a 32ml plastic bottle with eye dropper top for easy application.

A free MODEL Color and MODEL Air colour chart is available from us with any order, just ask for one in the order comments box.

Vallejo Decal Softener is designed to protect and smooth the edges to aid blending into the surface of the model. It also softens the decal to allow it form around surface texture and detail.

Vallejo Decal Fix cleans and prepares the model surface prior to the application of decals or wet transfers without the need for a prior coat of varnish. It also prevents air bubbles and ‘greying’ under the surface of the decal.

A pack of 5 Non-Sterile Swan Morton type 10A scalpel blades intended only to fit the Swan Morton handles (MT010).

Tamiya Cement is a trusted glue for all styrene plastic model kits, This 40ml glass bottle is sturdy and comes with a handy brush attached to the cap.

Tamiya Cement is a trusted glue for all styrene plastic model kits, This 40ml glass bottle is sturdy and comes with a handy brush attached to the cap. This extra thin variant is handy for areas where the glue is required to freely flow along a join.

The original and best quality Swann Morton/Surgitek Number #3 nickel alloy surgical handle. Accepts blades MT020, and the Accurate Armour Micro Saw blades.

These Micro Saw blades are produced in high quality 0.4mm stainless steel and are designed to fit the Swann Morton No-3 handle.They are ideal for the precision cutting of plastics and wood, kits parts detail removing and precise hole cutting.

This set of 8 blades is designed for the precision cutting of Resin and cast hard plastics. Four designs of fine and coarse blades are included with a pair of each provided in this set.

These Micro Saw blades are produced in high quality 0.4mm stainless steel and are designed to fit the No-3 handle, which is included in this product. See below for other related products…..They are ideal for the precision cutting of plastics and wood, kits parts detail removing and precise hole cutting.

This set of 8 blades is designed for the precision cutting of Resin and cast hard plastics. Four designs of fine and coarse blades are included with a pair of each provided in this set.

These Micro Saw blades are produced in high quality 0.25mm stainless steel and are designed to fit the Swann Morton No-3 handle. Simply bend the tab over before fitting to the handle.They are ideal for the precision cutting of plastics, kits parts detail removing and precise hole cutting.

This set of 6 blades is designed for the precision cutting of styrene and general kit plastics. Three designs of fine, medium and coarse blades are included with a pair of each provided in this set.