Permalink to K194
Humber ‘Pig’ Mk-2
Customers who purchased this item also purchased these quality products from Accurate Armour
Humber ‘Pig’ Mk1
Developed from the FV1600 1 ton 4x4 Truck designed by the Humber Motor Car Company in the late 1940’s, the FV1611 was produced as a general purpose troop carrier. The requirement came about due to the high running and purchase costs of the Alvis Saracen. Over 1700 were constructed, and served in all British Army theatres of operation in the 1960’s and 1970’s. Many were modified for internal security duties, and served in N.Ireland …
STOP CHECKPOINT Signs (UK)
A set of two 1/35th scale Stop Checkpoint signs in etched brass with waterslide decals. This set is suitable for use in the UK and Northern Ireland …
Crowd control barrier set
A set of four 1/35th scale crowd control barriers in resin and etched brass. These interlocking galvanised steel barriers are typical in the UK, Northern Ireland (and elsewhere) for crowd control. Each barrier panel is 2”(52mm) wide x 1.5”(30mm) tall …
Alvis SARACEN 6x6 Ambulance
The Alvis SARACEN 6x6 APC family saw extensive service over several decades in all theatres of operation with the British Army. Originally designed in 1950 as a fully armoured wheeled APC for use in Malaya , the 10 Tonne SARACEN was powered by a 5765cc Rolls-Royce B80 Petrol Engine …
Developed from the FV1600 1 ton 4x4 Truck designed by the Humber Motor Car Company in the late 1940’s, the FV1611 was produced as a general purpose troop carrier. The requirement came about due to the high running and purchase costs of the Alvis Saracen. Over 1700 were constructed, and served in all British Army theatres of operation in the 1960’s and 1970’s. Many were modified for internal security duties, and served in N.Ireland. The Mk-2 was developed in reply to the worsening ‘Troubles’ in Northern Ireland in 1969. A further 1200kg of steel plate and other materials were used to protect the occupants from high velocity armour piercing rounds. Plates were welded to the roof, the front and sides of the cab and internal armour was added on the inside walls of the rear compartment. Blast protection was also added to the floor. All hatches were also uparmoured and direct vision slots with armoured glass added for greater ‘buttoned up’ visibility. The rear doors were also modified to give a full width flap firing, visibilty and ventilation.
The vehicle, nicknamed ‘Pig’ by crews’ due it being difficult to drive and uncomfortable to ride in, could carry a 6 man infantry squad plus its crew of driver and commander. By 1969 most of the FV1611’s were in the hands of scrap merchants and private civilian owners. The Ministry of Defence began the task of re-purchasing the vehicle for refurbishment and up-armouring. Steel bars were welded to the front of the vehicle to smash through demonstrators barricades made of upturned scrap cars and houshold furniture. At the rear, a large folding flap was deployed to protect the legs of soldiers sheltering behind the vehicle from stones and bottles ‘skimmed’ underneath. This version includes a rotating smoke grenade launcher. Pig Mk-2’s served in many forms well into the 1990’s.
This 1/35th scale model kit by Jon Bottomley and Rob Tearle comes complete with hollow hull, 13 opening hatches and 4 opening visors, partial interior and seats. An extensive etched brass detail set is also included with jerry can holders, steps, headlamp guard boxes, wipers, mirrors, roof plates and canvas tie-downs. The decal sheet provides six different registration plates, Union flags, and yellow Army confidential freephone markings.
Completed model dimensions (approximate):-
Inches/mm: Length 5.75/145, Width 2.3/60, Height 2.75/70