Permalink to K195
Humber ‘Flying Pig’ Mk-2
Customers who purchased this item also purchased these quality products from Accurate Armour
Urban Refuse Set #2 Glass & Plastic bottles
A comprehensive 1/35th scale resin set of Urban Refuse (That’s ‘Rubbish’ to most of us!), ideal for filling the odd corner of any diorama in a Modern era ‘untidy’ place. This set by Rob Tearle & Derek Hansen includes, discarded & smashed glass bottles & damaged plastic bottles. (supplied in assorted random colours
STOP CHECKPOINT Signs (UK)
A set of two 1/35th scale Stop Checkpoint signs in etched brass with waterslide decals. This set is suitable for use in the UK and Northern Ireland
Road concrete barrier set
A set of 6 1/35th scale resin cast concrete road barrier blocks. This set is suitable for use in the UK and Northern Ireland or anywhere as an improvised vehicle barriers for light non military vehicles
Land Rover CAV100 Snatch N.Ireland
This 1/35th scale resin and etched brass conversion set by Rob Tearle depicts the British Army CAV100 “Snatch” (N.Ireland version), and is designed to transform the 1/35th scale Hobby Boss Land Rover 110 or Wolf kits.The set includes full upper body with interior, V8 engine and replacement axles and a full set of road tyres with front mounted spare. All doors and bonnet can be placed open or closed and the roof hatch slides. Tinted armoured glass windows
Developed from the FV1600 1 ton 4x4 Truck designed by the Humber Motor Car Company in the late 1940’s, the FV1611 was produced as a general purpose troop carrier. The requirement came about due to the high running and purchase costs of the Alvis Saracen. Over 1700 were constructed, and served in all British Army theatres of operation in the 1960’s and 1970’s. Many were modified for internal security duties, and served in N.Ireland. The Mk-2 was developed in reply to the worsening ‘Troubles’ in Northern Ireland in 1969. A further 1200kg of steel plate and other materials were used to protect the occupants from high velocity armour piercing rounds. Plates were welded to the roof, the front and sides of the cab and internal armour was added on the inside walls of the rear compartment. Blast protection was also added to the floor. All hatches were also uparmoured and direct vision slots with armoured glass added for greater ‘buttoned up’ visibility.
The rear doors were also modified to give a full width flap firing, visibilty and ventilation. This version, the ‘Flying Pig’ was developed to provide a moveable barricade without having the problem of vehicles jammed against each other making them difficut to move should the situation change. On early examples the wings were simply made of tubing and chain link mesh fencing. Later, fibre glass sheets were riveted on and sliding ‘Makrolon’ windows added to provide firing ports with limited protection. Large rubber sheets were hung below the wings to protect soldiers legs from stones and petrol bombs.
The vehicle, nicknamed ‘Pig’ by crews’ due it being difficult to drive and uncomfortable to ride in, could carry a 6 man infantry squad plus its crew of driver and commander. By 1969 most of the FV1611’s were in the hands of scrap merchants and private civilian owners. The Ministry of Defence began the task of re-purchasing the vehicle for refurbishment and up-armouring. Steel bars were welded to the front of the vehicle to smash through barricades made of upturned scrap cars and houshold furniture. Pig Mk-2’s served in many forms well into the 1990’s.
This 1/35th scale model kit by Jon Bottomley and Rob Tearle comes complete with hollow hull, 13 opening hatches and 4 opening visors, partial interior and seats. An extensive etched brass detail set is also included with jerry can holders, steps, headlamp guard boxes, wipers, mirrors, roof plates and canvas tie-downs. The decal sheet provides six different registration plates, Union flags and yellow Army confidential freephone markings.
Completed model dimensions (approximate):-
Inches/mm: Length 5.75/145, Width 2.3/60(wings closed) 7/178(wings open), Height 2.75/70