New!

HELLO and welcome to our new website! Here are some of our new products to get your visit started. For everything else we make and sell just select from the menu above or create your own choices using the:-Enter something to search bar.

Prices are £GPB and include EC SalesTax (Non EC orders have this Tax REMOVED at the checkout). We hope you enjoy your visit!

C099
£74.00

This comprehensive 1/35th scale conversion set by Rob Tearle converts the TAMIYA Churchill kit* into the Assault Vehicle Royal Engineers (AVRE) Mk-VII. AVRE’s and Churchill ‘TOAD’ Flails (C066) were designed to clear all obstacles ahead during an armoured assault against fixed defences …

C101
£42.00

This extensive 1/35th scale Resin and Etched-Brass conversion set transforms the very nice and original TAMIYA Leopard 2A5 kit (MM242) into the Danish Leopard 2A5DK. The master model was designed by Jon Bottomley with research and historical background by Thomas Antonsen. The set includes a small selection of markings and full conversion instructions …

C103
£95.00

This very comprehensive 1/35th scale resin conversion set by Derek Hansen and Rob Tearle converts 1/35th scale AFV Club Centurion tank kits* to depict one of the 57 ‘long hull’ ARV’s Mk-2 with distinctive ribbed transmission deck covers. As far as we know at present all long hull ARV’s seem to be British REME service only …

C105
£105.00

Standard British produced Centurion ARV Mk-2 vehicles were modified by the Australian Army (RAEME) for use in South Vietnam from 1968 to 1971. The basic ARV’s had trackguards re-worked, fittings removed and protection added to allow the vehicles to operate in dense jungle. Extensive crew protection armour was added to the hull rear, and ACAV armour shields and additional weapons fitted for the commander and operator, hence the Australian Army South Vietnam (AASVN) designation …

A172
£13.00

A set of four 1/35th scale crowd control barriers in resin and etched brass. These interlocking galvanised steel barriers are typical in the UK, Northern Ireland (and elsewhere) for crowd control. Each barrier panel is 2”(52mm) wide x 1.5”(30mm) tall …

A176
£17.00

This 1/35th scale resin accessory set allows the detailing of the drivers position inside AFV Club Centurion kits. The all resin set designed by Rob Tearle includes side and rear bulkheads, drivers seat, controls and fittings and is suitable for all early marks of Centurion up to Mk-5. A detailed replacement roof panel is also included …

C104
£95.00

The Centurion ARV Mk-2 was the standard British Armoured Recovery Vehicle (ARV) from 1956 onwards and some served during the Gulf War of 1990/91 with the final vehicle leaving service in 1995. It’s flexibility, reliability, power and comprehensive recovery equipment made it one of the best ARV’s of it’s era. Most of these ARV’s were converted from gun tanks resulting in two distinct versions; with ‘long’ hull (Based on Centurion Mk-1/2) or ‘short’ hull (based on Centurion Mk-3/5). …

C093
£27.50

This 1/35th scale resin conversion by Jon Bottomley & Rob Tearle depicts the U.S.Army M4 Sherman Crocodile flamethrowing system as used in North West Europe in WW2. Four of these equipments were produced and issued to the HQ company of the U.S.Army 739th Tank Battalion and were used in combat in the closing weeks of WW2.The donor kits required comprise the Tamiya Churchill Crocodile (Trailer only) and the Tamiya M4 Sherman (in our studio example shown above), however …

A173
£15.00

A set of 6 1/35th scale resin cast concrete road barrier blocks. This set is suitable for use in the UK and Northern Ireland or anywhere as an improvised vehicle barriers for light non military vehicles …

MT011S
£13.00

These Micro Saw blades are produced in high quality 0.4mm stainless steel and are designed to fit the No-3 handle, which is included in this product. See below for other related products…..They are ideal for the precision cutting of plastics and wood, kits parts detail removing and precise hole cutting …

MT012S
£11.00

These Micro Saw blades are produced in high quality 0.25mm stainless steel and are designed to fit the No-3 handle, which is included in this product. Simply bend the tab over before fitting to the handle.They are ideal for the precision cutting of plastics, kits parts detail removing and precise hole cutting …

A171
£8.50

A set of two 1/35th scale Stop Checkpoint signs in etched brass with waterslide decals. This set is suitable for use in the UK and Northern Ireland …

K099
£40.00

The Humber Scout car is perhaps one of the best known vehicles of WW-II, and used in almost every British and commonwealth unit HQ, captured examples were also prized by the German Army …

A178
£25.50

Designed to take the sting out of a bulk load of Jerry cans, this impressive stack of approximately 280 cans saves you around £140 over 17 sets of our regular Jerry Cans (A113)! And we have done most of the work for you with almost all the caps and nearly half the the handles already fitted, not to mention the cleaning up!…

K111
£84.00

This superbly detailed 1/35th scale model depicts the British Army FV1620 Truck, 1 ton, 4x4 “Hornet / Malkara” that was in service with the RAC Parachute Squadron between 1965 and 1969. The Malkara missile, named by its Australian developers, combined with this specialised armoured version of the Humber 1 Ton vehicle was intended to fulfill a requirement for an airportable anti tank guided missile (ATGM) system. The missile carried a 56lb HESH warhead capable of destroying all known …

A017
£11.00

A set of 24 Modern 1/35th scale round oil cans, seen everywhere and used by everyone, particularly if the Chieftain MBT is involved! This set also contains white decals for the three main oil products used by UK military forces (and many others too) …

D45
£13.00

This 1/35th scale set represents the interlocking herringbone pattern seen mainly in western European barracks vehicle parks and parade grounds. The two sheets provided can be used individualy, cut or joined together and in combination with D46, Block Paving Edges used to create a finished rectangle area. …

D46
£8.50

This 1/35th scale set represents the interlocking herringbone pattern seen mainly in western European barracks vehicle parks and parade grounds. The parts provided can be used in combination with D45, Block Paving Plates, around the outside edge to create a finished rectangle area. The D46 set is comprised of 6 lengths and 4 corner pieces and is the area painted dark grey in these pictures …