Our Products

Highly accurate scale model kits

W03
£100.00

On the 2nd of October 1944 a 13 tonne V2(A4) Missile rose from the giant Peenemunde test stand-VII driven by the 56,000 lb thrust motor to an altitude of 84,000 feet. The missile impacted near its’ target 180km (112 miles) away 5-minutes later at a speed of 2,600 feet/second (1772 mph).The V2 was the most significant technical achievement of the “Rocket team” lead by Dr Werner Von Braun, and paved the way for modern ICBM systems, satellite launchers, …

W02
£150.00

The Fi-103 ‘Hellhound’ (V1) was designed as a low cost weapon, and was armed with a 1000kg warhead, and powered by a kerosine burning Argus ram jet engine. This engine only works once the V1 is accelerated to over 200 m.p.h.For ground launching the ‘ramp’ is actually a gigantic steam catapult, designed by the Walther company, and uses the explosive mixing of chemicals to generate high pressure steam. This catapult is capable of accelerating the 2 tonne V1 …

W01E
£60.00

The V1 and catapult are described in product codes W01 & W02 and this 1/35th scale model by Derek Hansen consists of set of 3 catapult sections, muzzle brake and support legs and walkway to extend the display catapult (W01) up to a 6 section firing length model the same size as (W02). So W01+W01E = W02…

W01
£100.00

The Fi-103 ‘Hellhound’ (V 1) was designed as a low cost weapon, and was armed with a 1000kg warhead, and powered by a kerosine burning Argus ram jet engine. This engine only works once the V1 is accelerated to over 200 m.p.h …

U001
£4.00

The best Stalwart kits just got better, with the inclusion of hi-tech laser cut headlamp guards. These replace the original combination of resin and etched brass and are simply cut out from the frame and applied to the model using the spacers and bolt details provided. The guards are perfect in scale, thickness and shape.All Stalwart kits made from August 2013 have these included as standard, this update set is for kits bought prior to that date …

T72
£14.00

Replacement 1/35th scale semi-flexible resin track for replacing the ‘rubber band’ or poorly detailed injection moulded track supplied with many model kits.The set contains moulded lengths to fit the Bronco Comet kit …

T70
£14.00

Replacement 1/35th scale semi-flexible resin track for replacing the ‘rubber band’ or poorly detailed injection moulded track supplied with many model kits. The set contains moulded lengths based on our normal Centurion steel track (T64).The IDF found that over very the very bad ground of the Golan region Centurion track tended to get the outer ‘spud’ edges bent upwards, making removal of the track pins a problem. It became common practice to cut off the ends of every …

T69
£14.00

Replacement 1/35th scale semi-flexible resin track for replacing the ‘rubber band’ or poorly detailed injection moulded track supplied with many model kits. The set will contain moulded lengths, or links depending on the actual vehicle type with some extra links …

T68
£14.00

Replacement 1/35th scale semi-flexible resin track for replacing the ‘rubber band’ or poorly detailed injection moulded track supplied with many model kits.The set will contain moulded lengths, or links depending on the actual vehicle type with some extra links. This set includes resin sprockets and adaptor rings for the Trumpeter Challenger-2 plastic kit …

T67
£14.00

Replacement 1/35th scale semi-flexible resin track for replacing the ‘rubber band’ or poorly detailed injection moulded track supplied with many model kits. The set will contain moulded lengths, or links depending on the actual vehicle type with some extra links …

T66
£14.00

Replacement 1/35th scale semi-flexible resin track for replacing the ‘rubber band’ or poorly detailed injection moulded track supplied with many model kits. The set will contain moulded lengths, or links depending on the actual vehicle type with some extra links …

T65
£14.00

Replacement 1/35th scale semi-flexible resin track for replacing the ‘rubber band’ or poorly detailed injection moulded track supplied with many model kits. The set will contain moulded lengths, or links depending on the actual vehicle type with some extra links …

T64
£14.00

Replacement 1/35th scale semi-flexible resin track for replacing the ‘rubber band’ or poorly detailed injection moulded track supplied with many Centurion model kits, such as Tamiya, Academy or Legends etc. This set contains lengths of pre-assembled links.If you are making an Israeli Centurion, or Centurion variant you may with to consider our IDF modified set T70 ‘Golan’ track as an option …

T63
£14.00

Replacement 1/35th scale semi-flexible resin track for replacing the ‘rubber band’ or poorly detailed injection moulded track supplied with many model kits. The set will contain moulded lengths, or links depending on the actual vehicle type with some extra links …

T62
£14.00

Replacement 1/35th scale semi-flexible resin track for replacing the ‘rubber band’ or poorly detailed injection moulded track supplied with many model kits. The set will contain moulded lengths, or links depending on the actual vehicle type with some extra links. This set includes replacement resin sprockets …

T61
£14.00

Replacement 1/35th scale semi-flexible resin track for replacing the ‘rubber band’ or poorly detailed injection moulded track supplied with many model kits. The set will contain moulded lengths, or links depending on the actual vehicle type with some extra links …

T60
£14.00

Replacement 1/35th scale semi-flexible resin track for replacing the ‘rubber band’ or poorly detailed injection moulded track supplied with many model kits. This set includes resin lengths, links, sprockets and spare turret mounted link plates. Suitable for all Post War Pershing series tanks …

T59
£14.00

Replacement 1/35th scale semi-flexible resin track for replacing the ‘rubber band’ or poorly detailed injection moulded track supplied with many model kits. The set will contain moulded lengths, or links depending on the actual vehicle type with some extra links …