Our Products / 1:35th Conversions

Convert a basic plastic kit to something a whole lot more interesting!

C105
£105.00

Standard British produced Centurion ARV Mk-2 vehicles were modified by the Australian Army (RAEME) for use in South Vietnam from 1968 to 1971. The basic ARV’s had trackguards re-worked, fittings removed and protection added to allow the vehicles to operate in dense jungle. Extensive crew protection armour was added to the hull rear, and ACAV armour shields and additional weapons fitted for the commander and operator, hence the Australian Army South Vietnam (AASVN) designation …

C104
£95.00

The Centurion ARV Mk-2 was the standard British Armoured Recovery Vehicle (ARV) from 1956 onwards and some served during the Gulf War of 1990/91 with the final vehicle leaving service in 1995. It’s flexibility, reliability, power and comprehensive recovery equipment made it one of the best ARV’s of it’s era. Most of these ARV’s were converted from gun tanks resulting in two distinct versions; with ‘long’ hull (Based on Centurion Mk-1/2) or ‘short’ hull (based on Centurion Mk-3/5). …

C102
£37.00

This extensive 1/35th scale Resin and Etched-Brass update set transforms and corrects the Hobby Boss Leopard 2A5DK kit (82405) into a corrected and better detailed model of the Danish Leopard 2A5DK. The master model was designed by Jon Bottomley with research and historical background by Thomas Antonsen. The set includes a small selection of markings and full conversion instructions …

C099
£74.00

This comprehensive 1/35th scale conversion set by Rob Tearle converts the TAMIYA Churchill kit* into the Assault Vehicle Royal Engineers (AVRE) Mk-VII. AVRE’s and Churchill ‘TOAD’ Flails (C066) were designed to clear all obstacles ahead during an armoured assault against fixed defences …

C097
£53.00

This comprehensive 1/35th scale conversion set in resin and etched Brass with decals was designed by Derek Hansen and converts the AFV Club Centurion kit* to depict one of the first production Mk-I (A41*) vehicles. Following on from the 1945 ‘Operation Sentry’ trials Centurion went into series production with the Mk-I, and this conversion represents a standard production vehicle …

C096
£63.00

This comprehensive 1/35th scale conversion set designed by Derek Hansen converts the AFV Club Centurion kit* to depict one of the very early prototype A41 vehicles. Under the codename ‘Operation Sentry’ six A41 prototypes were sent to Germany in May 1945 for extensive troop trials, and this conversion represents a typical vehicle from that trial. …

C094
£23.00

This 1/35th scale resin conversion set by Jon Bottomley is designed to convert the Miniart Daimler Dingo plastic kit into a vehicle used by British and Commonwealth forces in Malaya during the 1954 to 1966 period …

C093
£27.50

This 1/35th scale resin conversion by Jon Bottomley & Rob Tearle depicts the U.S.Army M4 Sherman Crocodile flamethrowing system as used in North West Europe in WW2. Four of these equipments were produced and issued to the HQ company of the U.S.Army 739th Tank Battalion and were used in combat in the closing weeks of WW2.The donor kits required comprise the Tamiya Churchill Crocodile (Trailer only) and the Tamiya M4 Sherman (in our studio example shown above), however …

C092
£53.00

This 1/35th scale conversion set by Jon Bottomley depicts the Marksman AA Turret system as fitted for trials to the UK Chieftain MBT chassis.Armed with twin 35mm Oerlikon KDA cannons firing 550 rounds/minute per gun, Marksman is capable of destroying aircraft at 4km in less than 8 seconds of detection, day or night and in all weather conditions …

C089
£27.50

A 1/35th scale resin and etched brass conversion by Jon Bottomley to convert the Bronco models Staghound Armoured Car to the twin 0.50 Cal HMG AA version. This simple to use conversion includes full illustrated instructions. The stowage set shown is also included, as are the late pattern exhaust shields …