Our Products / 1:35th Kits

Our 1:35th scale full kits complement the vast product ranges of all the mainstream model manufacturers, and the wee guys like us too.

K180
£200.00

This 1/35th scale resin and etched brass kit by David Jane and Rob Tearle depicts the FODEN IMMLC DROPS 8x6 Op’ HERRICK.* This impressive and versatile logistic support vehicle was developed for front-line off-road use by the British Army and entered service in 1994. The principle use for the 400+ vehicles in service is 155mm ammunition supply for AS90 batteries, but is also used in a multitude of logistic tasks …

K179w
£226.00

This 1/35th scale resin and etched brass kit by David Jane and Rob Tearle depicts the FODEN IMMLC DROPS 8x6.*This impressive and versatile logistic support vehicle was developed for front-line off-road use by the British Army and entered service in 1994. The principle use for the 400+ vehicles in service is 155mm ammunition supply for AS90 batteries, but is also used in a multitude of logistic tasks …

K179i
£221.00

This 1/35th scale resin and etched brass kit by David Jane and Rob Tearle depicts the FODEN IMMLC DROPS 8x6.*This impressive and versatile logistic support vehicle was developed for front-line off-road use by the British Army and entered service in 1994. The principle use for the 400+ vehicles in service is 155mm ammunition supply for AS90 batteries, but is also used in a multitude of logistic tasks…

K179a
£226.00

This 1/35th scale resin and etched brass kit by David Jane and Rob Tearle depicts the FODEN IMMLC DROPS 8x6.*This impressive and versatile logistic support vehicle was developed for front-line off-road use by the British Army and entered service in 1994. The principle use for the 400+ vehicles in service is 155mm ammunition supply for AS90 batteries, but is also used in a multitude of logistic tasks …

K179
£189.50

This 1/35th scale resin and etched brass kit by David Jane and Rob Tearle depicts the FODEN IMMLC DROPS 8x6.*This impressive and versatile logistic support vehicle was developed for front-line off-road use by the British Army and entered service in 1994. The principle use for the 400+ vehicles in service is 155mm ammunition supply for AS90 batteries, but is also used in a multitude of logistic tasks …

K178
£116.00

This 1/35th scale resin and etched brass kit by David Jane and Rob Tearle depicts the COYOTE Tactical Support Vehicle (Light), TSV(L), designed by Supacat in the UK for the British Army.The 6x6 Coyote is based the Jackal-2 4x4 SRV introduced in 2009 and combines the stunning cross country performance, firepower, payload capacity and endurance of Jackal-2 with an enhanced payload capacity.Coyote continues to serve in a number of different configurations and with many units. Versions of the …

K177
£95.00

This 1/35th scale resin and etched brass kit by David Jane and Rob Tearle depicts the JACKAL-2 Surveillance and Reconnaissance Vehicle (SRV), designed by Supacat in the UK for the British Army.Jackal-2 was Introduced in 2009 and combines the stunning cross country performance, firepower, payload capacity and endurance of Jackal-1 with a new powerplant, and many design improvements.Jackal continues to serve in a number of different configurations and with many units. Versions of the HMT design are also …

K176
£95.00

This 1/35th scale resin and etched brass kit by David Jane and Rob Tearle depicts the JACKAL-1 Surveillance and Reconnaissance Vehicle (SRV), designed by Supacat in the UK for the British Army.Introduced in 2008 (and initially known as M-WMIK), the stunning cross country performance, firepower, payload capacity and endurance made the Jackal an instant success.Jackal-1 continues to serve in a number of different configurations and with many units. Versions of the HMT design are also in service with …

K174
£84.50

A complete 1/35th scale resin and etched brass kit of the famous “Rogers” 45 Ton Tank Transporter/Recovery Trailer.This model designed by David Jane and Rob Tearle features fully detailed suspension with articulating bogies and steerable front carriage, moveable ramps and alternative ramp/chock options. A full set of tie-downs, tensioners, chains and blocks are also included. Also included are the recovery pully blocks for recovery versions. Decals are included with a good selection of UK markings and options for …

K172
£74.00

This 1/35th scale resin and etched brass model kit by David Jane and Derek Hansen depicts one of the most well known British light ambulance vehicles of WW2.The Humber FWD 8cwt 4x4 Light Ambulance body was produced by Thrupp & Mabely. A total of 1144 were supplied, and could carry 2-stretcher + 3-sitting (or 5-sitting) casualties. These vehicles were used throughout WW2 and early Post War …

K171
£95.00

A complete 1/35th scale resin and etched brass kit of the Post War Cranes Mk-1/2 12 (Twin wheel) 40 Ton Tank Transporter/Recovery Trailer. This model designed by David Jane and Rob Tearle features fully detailed suspension with articulating bogies and steerable front carriage, moveable ramps and alternative ramp/chock options. A full set of tie-downs, tensioners, chains and blocks are also included.Also included are recovery pully blocks for AFV recovery. Decals are included with a good selection of registration …

K170
£137.00

The Semi-trailer, 60 Ton FV3001/3005 was produced by Joseph Sankey & Sons for the Mighty Antar 5th wheel tractors Mk-2 and Mk-3. Intended for the movement of large & super-heavy AFV’s this trailer was the standard unit for moving the Conqueror Heavy Gun Tank and the (lighter!) Chieftain MBT. It had a standard 5th wheel coupling and hydraulically operated ramps and jacks …

K169
£116.00

The Semi-trailer, 50 Ton FV3011 was produced by Taskers/Sankey for the Mighty Antar 5th wheel tractors Mk-2 and Mk-3.Intended for the movement of large AFV’s this trailer was the standard unit for moving Centurion and Chieftain MBT’s and Leopard (when visiting the UK). It had a standard 5th wheel coupling with manual loading ramps and hydraulic jacks …

K168
£137.00

This massive 50-Ton Drawbar trailer was produced by Dyson/ Cranes for use with the Diamond-T, Mighty Antar and Scammell Commander Ballasted Tractors. It appeared in it’s original form in 1944 and was used for over 40 years!Intended for the movement of large AFV’s up to 50-Ton weight class, the FV3601 No-1 Mk-3 trailer was the standard post-WW2 unit for moving later marks of Churchill, all Centurion based AFV’s, and all NATO MBT’s of thier era. The chassis …

K167
£236.50

The Thornycroft Mighty Antar was originally developed in 1949 as a super-heavy civilian 6x4 tractor for hauling steel pipeline sections across the Iraqi desert. It was named in honour of the Arabian Poet-warrior Antar Ibn Shadded (famed for his strength and endurance).At the time ANTAR was the largest tractor ever made in the UK and was further developed as a tank transporter for the British Army, and over a period of 35 years from the early 1950’s to …

K166
£189.50

The Thornycroft Mighty Antar was originally developed in 1949 as a super-heavy civilian 6x4 tractor for hauling steel pipeline sections across the Iraqi desert. It was named in honour of the Arabian Poet-warrior Antar Ibn Shadded (famed for his strength and endurance).At the time ANTAR was the largest tractor ever made in the UK and was further developed as a tank transporter for the British Army, and over a period of 35 years from the early 1950’s to …

K165
£236.50

The Thornycroft Mighty Antar was originally developed in 1949 as a super-heavy civilian 6x4 tractor for hauling steel pipeline sections across the Iraqi desert. It was named in honour of the Arabian Poet-warrior Antar Ibn Shadded (famed for his strength and endurance).At the time ANTAR was the largest tractor ever made in the UK and was further developed as a tank transporter for the British Army, and over a period of 35 years from the early 1950’s to …