Products / 1:35th Kits

Our 1:35th scale full kits complement the vast product ranges of all the mainstream model manufacturers, and the wee guys like us too.

W03
£105.50

On the 2nd of October 1944 a 13 tonne V2(A4) Missile rose from the giant Peenemunde test stand-VII driven by the 56,000 lb thrust motor to an altitude of 84,000 feet. The missile impacted near its’ target 180km (112 miles) away 5-minutes later at a speed of 2,600 feet/second (1772 mph).The V2 was the most significant technical achievement of the “Rocket team” lead by Dr Werner Von Braun, and paved the way for modern ICBM systems, satellite launchers, …

W02
£158.00

The Fi-103 ‘Hellhound’ (V1) was designed as a low cost weapon, and was armed with a 1000kg warhead, and powered by a kerosine burning Argus ram jet engine. This engine only works once the V1 is accelerated to over 200 m.p.h.For ground launching the ‘ramp’ is actually a gigantic steam catapult, designed by the Walther company, and uses the explosive mixing of chemicals to generate high pressure steam. This catapult is capable of accelerating the 2 tonne V1 …

W01E
£63.50

The V1 and catapult are described in product codes W01 & W02 and this 1/35th scale model by Derek Hansen consists of set of 3 catapult sections, muzzle brake and support legs and walkway to extend the display catapult (W01) up to a 6 section firing length model the same size as (W02). So W01+W01E = W02…

W01
£105.50

The Fi-103 ‘Hellhound’ (V 1) was designed as a low cost weapon, and was armed with a 1000kg warhead, and powered by a kerosine burning Argus ram jet engine. This engine only works once the V1 is accelerated to over 200 m.p.h …

K200
£137.00

The Armoured Vehicle Launched Bridge (AVLB) No-8 is a miracle of modern engineering, at 80 foot long, with an 80 Tonne weight class, In fact new aluminium alloys were developed just for this project, along with revolutionary hydraulics. Anyway…..on to the model! Why make just a bridge? The simple answer is that once a bridgelayer has laid a bridge….it gets another one and moves on… leaving the bridge for all the diorama modellers to put vehicles across! This …

K196
£73.50

Developed from the FV1600 1 ton 4x4 Truck designed by the Humber Motor Car Company in the late 1940’s, the FV1611 was produced as a general purpose troop carrier. The requirement came about due to the high running and purchase costs of the Alvis Saracen. Over 1700 were constructed, and served in all British Army theatres of operation in the 1960’s and 1970’s. Many were modified for internal security duties, and served in N.Ireland. The Mk-2 was developed …

K195
£84.00

Developed from the FV1600 1 ton 4x4 Truck designed by the Humber Motor Car Company in the late 1940’s, the FV1611 was produced as a general purpose troop carrier. The requirement came about due to the high running and purchase costs of the Alvis Saracen. Over 1700 were constructed, and served in all British Army theatres of operation in the 1960’s and 1970’s. Many were modified for internal security duties, and served in N.Ireland. The Mk-2 was developed …

K194
£78.50

Developed from the FV1600 1 ton 4x4 Truck designed by the Humber Motor Car Company in the late 1940’s, the FV1611 was produced as a general purpose troop carrier. The requirement came about due to the high running and purchase costs of the Alvis Saracen. Over 1700 were constructed, and served in all British Army theatres of operation in the 1960’s and 1970’s. Many were modified for internal security duties, and served in N.Ireland. The Mk-2 was developed …

K193
£158.00

The Bedford MK 4-Tonne 4x4 entered service in 1969 and gradually replaced the Bedford RL in British Army service, and along with the later engined MJ model from 1977 onwards, became the most numerous medium truck in British Army service in modern times. Adopted by many other armies around the world and in later civilian ‘after-life’, to say that it’s been everywhere, done everything and remains iconic are all huge understatements! …

K189
£168.50

This comprehensive 1/35th scale full kit by Jon Bottomley & Rob Tearle depicts the huge British WW-2 45-Ton Tracked Recovery Trailer which was designed to be used with the Churchill ARV Mk-I or large tracked caterpillar tractors or heavy recovery tractors. Designed by Cranes (Dereham)Ltd. for tank recovery and for transporting very heavy equipment on the beaches for the forthcoming Normandy landings this trailer weighs in at 30 Tons unladen. …

K188L
£116.00

This 1/35th Scale all resin full kit was researched and designed by David Jane and Rob Tearle.The Bedford MK 4-Tonne 4x4 entered service in 1969 and gradually replaced the Bedford RL in British Army service, and along with the later engined MJ model from 1977 onwards, became the most numerous medium truck in British Army service in modern times. Adopted by many other armies around the world and in later civilian ‘after-life’, to say that it’s been everywhere, …

K188E
£116.00

This 1/35th Scale all resin full kit was researched and designed by David Jane and Rob Tearle. The Bedford MK 4-Tonne 4x4 entered service in 1969 and gradually replaced the Bedford RL in British Army service, and along with the later engined MJ model from 1977 onwards, became the most numerous medium truck in British Army service in modern times. Adopted by many other armies around the world and in later civilian ‘after-life’, to say that it’s been …

K186
£158.00

The Bedford RL series of 3-Ton (Later uprated to 4-tonne) trucks are one of the most well known and mass produced British vehicles of the post war era with approximately 73,000 made over a 17 year period. Entering service in 1952 the Bedford RL served in almost every British military unit long after production ended in 1969. This workhorse of the post war British Army was adapted into a wide range of versions to suit many particular operational …