Products / 1:48th Products

Our highly detailed range supporting 1:48th Aircraft models and AFV updates

K48017
£42.50

The RAF procured many towed fuel bowsers for use on smaller fighter airfields. The Brockhouse MK2 refers to the chassis used, The tank was made by Butterfields with Zwicky pump gear being powered by a single cylinder Lister engine providing a self contained unit that could be easily towed by any airfield vehicle large enough but typically the Fordson Model N or David Brown 4x2. Both of these towing vehicles can be found in this section. …

K48016
£23.50

The Fordson Model N, a development of the Model F, was in wide scale civilian use by the late 1930’s in the UK. As the ranks of the RAF had swelled so quickly in the early part of the war there was a shortage of airfield vehicles. As a result, many civilian vehicles were pressed into service …

K48015
£74.00

A complete 1/48th scale resin model kit of the Classic British WW2 (& Post War) AEC 0854 6x6 fitted with the COLES EMA Mk-VII 6 Ton Crane by Rob Tearle & David Jane. The EMA (Electro-Mechanical Airfield) crane was electric powered for slewing and raising, with the DC generator driven by a Ford V8 Engine aft of the drivers cab. These were very capable machines and able to lift way beyond the 6 Ton design limit. One was …

K48013
£74.00

A complete 1/48th scale resin model kit of the Classic British WW2 (& Post War) AEC 854/0854 6x6 2500 gallon Refueller by David Jane.The model features cab and pump chamber internal detail, suspension, optional spare wheel carrier and chassis. This version includes a pair of refuelling booms for refuelling Propeller Aircraft. Rubber hose lines are also included. A standard RAF vehicle for both concrete and grass airfields …

K48012
£68.50

A complete 1/48th scale resin model kit of the Classic British WW2 (& Post War) Bedford QL 4x4 950 Gallon Petrol Tanker (RAF & ARMY) by David Jane. The model features internal cab and detailed pump chambers, suspension, and chassis. Hose lines are also included. A standard RAF and Army vehicle for airfield and general fuel transport duties.This model shown depicts a vehicle in WW2 RAF service (Extensive alternative decals are also included) …

K48010
£37.00

A complete 1/48th scale resin model kit of the Classic British Thompson 3-wheeled Refueller Mk-Vc by David Jane. Thompson Brothers Ltd started to produce 3-wheeled refuellers for civilian airstrips long before WW-2. The low profile and ability to swing the fuel tank under the wings of aircraft allowed the tanker to be positioned close to small aircraft in confined spaces. These were produced in large numbers for the RAF and used on fighter airfields throughout WW-2 and beyond…

K48009
£68.50

A complete 1/48th scale resin model kit of the Classic British WW2 (& Post War) Bedford QL 4x4 950 Gallon AVTUR Refueller (RAF) by David Jane. AVTUR Refuellers filter the fuel to make it suitable for turbine (Jet) powered aircraft.The model features internal cab and pump chamber detail, elevating booms, suspension, and chassis. A rubber hose line is also included. A standard RAF vehicle for both concrete airfields operating Jet Aircraft. This model shown depicts a vehicle in …

K48008
£58.00

A complete 1/48th scale resin model kit of the Classic British WW2 (& Post War) AEC Matador 4x4 RAF Platform bed truck by David Jane.The model features full cab and chassis detail. A standard RAF vehicle for general heavy load duties which had a very long service life. This model shown depicts a vehicle in WW2 or Post-war RAF service …

K48007
£74.00

A complete 1/48th scale resin model kit of the Classic British WW2 (& Post War) AEC 854/0854 6x6 2500 gallon Refueller by David Jane.The model features cab and pump chamber internal detail, suspension, optional spare wheel carrier and chassis. This version includes a pair of refuelling booms and filter systems for refuelling Jet Aircraft. Rubber hose lines are also included. A standard RAF vehicle for both concrete and grass airfields.This model shown depicts a vehicle in WW2 or …

K48006
£23.50

A complete 1/48th scale resin model kit of the Classic British WW2 (& Post War) David Brown Towing Tractor 4x2 by David Jane.The model features excellent detail, suspension, winch and chassis. A standard RAF vehicle for both concrete and grass airfields. The David Brown appeared in many marks both during and after WW2 and was used in large numbers for towing aircraft, bomb trolleys and other small wheeled ancillary equipment …

K48005
£27.50

A complete 1/48th scale resin model kit of the Classic British WW2 (& Post War) Standard 4x2 GS Utility (Better known as a ‘Tilly’) by David Jane.The model features internal detail, suspension, and chassis. The Standard was the most used Tilly produced for the RAF for use on both concrete and grass airfields …

K48004
£63.50

A complete 1/48th scale resin model kit of the Classic British WW2 (& Post War) Crossley FWD 4x4 Foam/C02 Fire Crash Tender (RAF) by David Jane.The model features extensive detail, tools, suspension, and chassis. A standard RAF vehicle for both concrete and grass airfields …

K48003
£68.50

A complete 1/48th scale resin model kit of the Classic British WW2 (& Post War) Bedford QL 4x4 950 Gallon Refueller (RAF) by David Jane.The model features internal cab and pump chamber detail, elevating booms, suspension, and chassis. A rubber hose line is also included. A standard RAF vehicle for both concrete and grass airfields …

K48002
£74.00

A complete 1/48th scale resin model kit of the Classic British WW2 (& Post War) AEC 854/0854 6x6 2500 gallon Refueller (RAF Bomber Command) by David Jane.The model features cab and pump chamber internal detail, suspension, optional spare wheel carrier and chassis. A rubber hose line is also included. A standard RAF vehicle for both concrete and grass airfields …

K48001
£58.00

A complete 1/48th scale resin model kit of the Classic British WW2 (& Post War) Austin K2Y (KATY) 4x2 Heavy Ambulance by David Jane. The model features internal and engine detail, 4 stretchers, suspension and chassis. A standard RAF (& Army) vehicle.This model depicts a vehicle in RAF service (Extensive RAF and Army decals are also included), markings are also provided for the USAF (who bought the K2Y under ‘reverse lend lease’)This new and original range combines fine …

C48009
£9.50

This 1/48th scale resin conversion set was designed by Rob Tearle and depicts a pair of WW2/Post war “All Round Vision” (ARV) cupolas with opening hatches to fit the Tamiya 1/48th scale Cromwell Mk-4 kit …

C48006
£13.00

A simple to apply resin conversion set for the new Tamiya 1/48th Scale Cromwell plastic kit. This set can be used to add later stowage fittings and to convert the turret to mount the late rotating multi-vision block cupola. A ‘split’ drivers hatch is also included. This set can be used in conjunction with other AA conversion sets and is shown here used with C48004 D/F deck set …