Products / Fortification Products

1:35th and 1:76th scale Military bunkers, obstacles and fortifications

FF76028
£29.50

A five part boxed resin 1/76th scale sea wall gun pit designed by Dan Taylor for the 5cm Festungspak Anti-tank gun (Available as kits FF76023 & FF76024. This pit is typical of a N.W.Europe Atlantic wall type similar to those in Normandy. The design includes part of the upper roadway, and can be used in conjunction with our sea-wall sets FF76008-FF76010. The bunker is approximately 10cm(4”) square by 7.5cm(3”) high. Crew and ammunition are also available as FF76025 & FF76026)…

FF76027
£13.00

A two part resin 1/76th scale sunken pit for the 5cm Festungspak Anti-tank gun (Available as kits FF76023 & FF76024. This pit is typical of a N.W.Europe type similar to the one at ‘Pegasus Bridge’. Crew and ammunition are also available as FF76025 & FF76026)…

FF76026
£6.50

A comprehensive 1/76th scale 5cm Pak ammunition set with complete rounds, and a selection of closed/empty & part filled boxes …

FF76025
£6.50

A full action posed 1/76th scale 5cm Festungspak gun crew with 5cm Pak ammunition and containers …

FF76024
£13.00

The 5cm Festungspak was the most standard fortress anti-tank weapon used by the German Army, almost all fortified positions had a couple of these in addition to the usual Tobruk Pits. This model by Dan Taylor depicts the later L/60 version made from old Panzer-III tank guns. This model comes with turned aluminium barrel. We also produce crew, ammunition and bunker sets for this weapon …

FF76023
£13.00

The 5cm Festungspak was the most standard fortress anti-tank weapon used by the German Army, almost all fortified positions had a couple of these in addition to the usual Tobruk Pits. This model by Dan Taylor depicts the L/42 version made from old Panzer-III tank guns. This model comes with turned aluminium barrel. We also produce crew, ammunition and bunker sets for this weapon …

FF76021
£47.50

This Pak Casemate Typ-677 was found on all but one of the Normandy invasion beaches, and in particular was the strongpoint responsible for much of the tank losses on OMAHA beach. This standard casemate was also found inland around fortress towns, and also on the West Wall. Any anti-tank gun could be used from inside, but the principle weapon was the 8.8cm Pak 43/41 ‘Barn Door’.This model designed by Derek Hansen is cast in polyurethane resin, with an interior, ammunition, …

FF76020
£47.50

Resin 1/76th scale boxed bunker set by Rob Tearle with entrance corridor, pipe vents, escape hatch, 6-sided loophole armoured cupola with optional MG and blank plugs. The Tobruk pit is hollow with interior staircase and AA machine gun in rotating gun ring. An entrance walkway trench wall is also included. In plan view this model measures 18cm x 18cm (7”x7”)…

FF76019
£27.50

A complete 1/76th scale model by Derek hansen of a standard Luftwaffe Typ-209A 3.7cm (or quad 2cm) free standing gun position bunker . The model comes with removable roof apron, interior ammunition positions arranged in the classic AA style, and a crew shelter with access steps. The rear has the gun access ramp with wooden/girder blocking barrier, and a crew access/telephone recess area. The bunker is cast in resin with a realistic concrete shuttering texture …

FF76018
£13.00

A complete 1/76th scale model by Derek hansen of a standard Typ-67 bunker with Renault R35 turret. The model comes with removable roof, interior detail, rorating turret and fortress telephone. The bunker is cast in resin with a realistic concrete shuttering texture …

FF76017
£13.00

A 1/76th scale model of the standard Tobruk Stand (Type-58c) of which over 10,000 were distributed on the Atlantic Wall alone. This model comes with interior detail, MG and rotating shield and Fortress Telephone …

FF76016
£13.00

A 1/76th scale Fortress concrete sentry box with an Officer figure plus a guard figure with dog. The sentry box has an interior with fortress telephone. This type of box was used at the entrances to fortified areas such as infantry strongpoints and gun batteries etc …

FF76015
£8.50

A very simple to use etched brass set, with ten 1/76th scale barbed wire panels combined with mounting posts and extra strands of barbed wire. Beware when using, as it works like the real thing!…

FF76014
£84.50

This joint 1/76th scale WW2 Atlantic Wall project with Fine Cast Models of Germany, depicts the massive Ex Gneisenau Battlecruiser turrets emplaced as Battey Fjell (MAA 11/504) and battery Öerlandet (MAA 4/507) in Norway during WW2.Each turret mounted three 28cm (11 inch) SK C/34 Guns housed on top of five level deep underground bunkers which have all the magazines and ammunition handling equipment usually found in a large ship.This resin and etched brass model kit was designed and produced by …

FF76013
£27.50

This resin and metal road barrier by Rob Tearle, integrates with products FF76012 Dragons Teeth (M1939) and forms a complete West Wall movable road barrier, connection parts for adjacent dragons teeth sets are included, and the girders are cast in metal. The figure is shown for scale only, and is not included …

FF76012
£27.50

A set of 1/76th scale integrated ‘West Wall’ Typ-M1939 dragons teeth anti-tank obstacles with foundation bars by Derek Hansen. They are arranged in a set pattern, and the set can be extended by adding more sections. This is the correct system…not a set of individual pyramids! An integrated road barrier is also avaiable as FF76013. The figure is shown for scale only, and is not included …

FF76011
£8.50

A set of 6x 1/76th scale German WW-II steel Girder Tetrahedra obstacles. These were pre-fabricated in local workshops throughout occupied Europe …

FF76010
£17.00

A pair of 1/76th scale Anti-tank sea wall corner sections 25cm (10”) long which are part of our modular coastal defence system. One internal, and one external corner group is included. The castings have a realistic concrete shuttering texture. (Figure and obstacle not included, they are shown for scale)…