AA products / Naval products

1:76th and 1:35th Submarines, Landing craft and accessory sets

S02
£158.00

This small late war German submarine was designed for coastal use and was armed with 2 torpedoes and could engage targets using a combination of silent drive and advanced passive sonar. The Typ XXIII was produced in very small numbers at the end of WW-2.The interesting Scottish connection is that this type penetrated the Forth Estuary naval area in the last hours of WW-2 (in Europe) and sunk two merchant ships without detection. Post war examples of this type (and

D35
£17.00

The WW-2 Royal Navy ‘HARD’ consisted of pre-cast concrete blocks laid into beaches to form a sloping ramp for the loading and unloading of Tank Landing Craft and for DD Tanks and other amphibious vehicles to drive in and out o

D34
£17.00

The WW-2 Royal Navy ‘HARD’ consisted of pre-cast concrete blocks laid into beaches to form a sloping ramp for the loading and unloading of Tank Landing Craft and for DD Tanks and other amphibious vehicles to drive in and out o

D15
£17.00

This 1/35th scale set comprises a wood/metal gangway, a pair of large wooden buffer pontoons with tie downs and a pair of rope fenders, plus woven rope. The set may be used to moor any naval model against o

D13
£158.00

A set of two Quayside modules in 1/35th scale which can be used alone, or as part of a larger model. This set comprises two fortified bunker modules, one with raised flak position with 2cm gun, and Renault R35 turret on top of a shelter. The second has a sunken shelter and the end stops for the quayside crane rail lines. These fortifications are typical of WW-II Occupied Europe designs. The modules are moulded in lightweight resin, with the other

D12
£147.50

A set of three Quayside modules in 1/35th scale which can be used alone, or as part of a larger model. This set comprises two plain ‘deck’ modules, and one ‘stairway’ module.All three units have crane rail lines, pavements, drain covers railings and mooring fittings. The stairway module also has a lifebelt holder. The modules are moulded in lightweight resin, with the other fittings in resin. Total size is 723mm(29”)long by 190mm(7.5”) deep by 102mm(4”) high.Our complete Quayside uses (D12)