Model Supplies / Glues and Fillers

Stick, glue, join and fill until the job is done

MPDEV
£16.00

Devcon 2-Part Epoxy is a great glue for very large parts where it would be impractical to use superglue. Also handy for constructing diorama bases etc …

MPG01
£4.00

Vitalbond thick superglue is great for medium sized parts or where a little more time might be required for positioning. This particular version cures in 10 seconds …

MPG03
£4.49

Zap CA Very Thin superglue is great for highly detailed parts where feeding glue in to an assembled join is required. This 14.1g bottle comes with a fine nozzle and an even finer flexible tube nozzle.Cures in 4 seconds…

MPG05
£7.00

Vitalbond Odourless suerglue Foam safe works on most foams and some other plastics …

MPMS
£4.00

Milliput Standard green filler is a two part epoxy filler with a multitude of uses not least for sculpting and filling in the modelling application …

MPMSG
£4.00

Milliput Grey Fine filler is a two part epoxy filler with a multitude of uses not least for sculpting and filling in the modelling application. This grade is of particular use to figure sculptors due to its extremely fine grade …

MPSGA
£8.00

Vitalbond Activator Spray is great for getting superglue to cure instantly and is of particular use in dry climates …

MPSGDB
£7.00

Zap De-Bonder is effective at removing bonded superglue from where you don’t want it …

MPSQ9050
£6.00

Squadron Green Putty is a great, fast filler that is easy to apply with no mixing required. Once set it can be easily carved or sanded …

UHU429
£6.00

The all purpose adhesive from UHU for all gereral modelling and diorama uses. It can be used as a contact or general use adhesive. This is the large 125ml Tube (not the tiny blister packed effort on sale in most shops!) …

UHU455
£6.00

The special version of the adhesive from UHU for porous surfaces (particularly Balsa) and diorama uses. This is the large 125ml Tube (not the tiny blister packed effort on sale in most shops!) …

UHU459
£6.00

The special version of the adhesive from UHU for Polystyrene and Styrofoam materials which are ideal for building up diorama landscapes. Sold as a 40g tube …

AL7000
£14.99

This value starter set contains one 60ml bottle of Plast-I-Weld clear welding adhesive (AL7112), a Touch-N-Flow Applicator (AL711) and handy filler bottle (AL715). This is the ideal set for the assembly of any styrene or ABS plastic injection model kit or scratchbuilding product …

AL711
£8.95

This handy product helps keep solvents safe from spillage on your workspace. Designed with Plast-I-Weld bottle, the Filler Bottle and the Touch-N-Flow applicator in mind this sturdy unit also has slots for two brushes …

AL7112
£4.94

This set contains one 60ml bottle of Plast-I-Weld clear welding adhesive. This is the ideal set for the assembly of any styrene or ABS plastic injection model kit or scratchbuilding product …

Al715
£4.94

This item provides spill free filling of your Touch-N-Flow applicator …

AL721
£6.49

The applicator specially designed for precise control of liquid solvent and Cyanoacrylate activator. (Not for Cyanoacrylate Glue)…

TAM87003
£2.50

Tamiya Cement is a trusted glue for all styrene plastic model kits, This 40ml glass bottle is sturdy and comes with a handy brush attached to the cap …