New!

HELLO and welcome to our new website! Here are some of our new products to get your visit started. For everything else we make and sell just select from the menu above or create your own choices using the:-Enter something to search bar.

Prices are £GPB and include EC SalesTax (Non EC orders have this Tax REMOVED at the checkout). We hope you enjoy your visit!

K196
£73.50

Developed from the FV1600 1 ton 4x4 Truck designed by the Humber Motor Car Company in the late 1940’s, the FV1611 was produced as a general purpose troop carrier. The requirement came about due to the high running and purchase costs of the Alvis Saracen. Over 1700 were constructed, and served in all British Army theatres of operation in the 1960’s and 1970’s. Many were modified for internal security duties, and served in N.Ireland. The Mk-2 was developed …

LRA012
£53.00

This 1:35th scale conversion set (For the Hobby Boss Land Rover kit) by Rob Tearle covers the early part of the TANGI service life up to approximately 1999 whereupon the fleet was upgraded further, re-liveried and fitted with the same chassis and engine as the contemporary Military 110 ‘Wolf’. (These later TANGI vehicles will be the subject of a future product) The set contains full internal and external detail, engine, rear axle and extensive etched brass mesh and …

LRA013
£45.00

This 1/35th scale resin and etched brass conversion set by Rob Tearle depicts the British Army CAV100 “Snatch” (N.Ireland version), and is designed to transform the 1/35th scale Hobby Boss Land Rover 110 or Wolf kits.The set includes full upper body with interior, V8 engine and replacement axles and a full set of road tyres with front mounted spare. All doors and bonnet can be placed open or closed and the roof hatch slides. Tinted armoured glass windows …

K48015
£74.00

A complete 1/48th scale resin model kit of the Classic British WW2 (& Post War) AEC 0854 6x6 fitted with the COLES EMA Mk-VII 6 Ton Crane by Rob Tearle & David Jane. The EMA (Electro-Mechanical Airfield) crane was electric powered for slewing and raising, with the DC generator driven by a Ford V8 Engine aft of the drivers cab. These were very capable machines and able to lift way beyond the 6 Ton design limit. One was …

K48010
£37.00

A complete 1/48th scale resin model kit of the Classic British Thompson 3-wheeled Refueller Mk-Vc by David Jane. Thompson Brothers Ltd started to produce 3-wheeled refuellers for civilian airstrips long before WW-2. The low profile and ability to swing the fuel tank under the wings of aircraft allowed the tanker to be positioned close to small aircraft in confined spaces. These were produced in large numbers for the RAF and used on fighter airfields throughout WW-2 and beyond…

C099
£73.50

This comprehensive 1/35th scale conversion set by Rob Tearle converts the TAMIYA Churchill kit* into the Assault Vehicle Royal Engineers (AVRE) Mk-VII. AVRE’s and Churchill ‘TOAD’ Flails (C066) were designed to clear all obstacles ahead during an armoured assault against fixed defences …

C101
£42.00

This extensive 1/35th scale Resin and Etched-Brass conversion set transforms the very nice and original TAMIYA Leopard 2A5 kit (MM242) into the Danish Leopard 2A5DK. The master model was designed by Jon Bottomley with research and historical background by Thomas Antonsen. The set includes a small selection of markings and full conversion instructions …

C103
£94.50

This very comprehensive 1/35th scale resin conversion set by Derek Hansen and Rob Tearle converts 1/35th scale AFV Club Centurion tank kits* to depict one of the 57 ‘long hull’ ARV’s Mk-2 with distinctive ribbed transmission deck covers. As far as we know at present all long hull ARV’s seem to be British REME service only …

C105
£105.00

Standard British produced Centurion ARV Mk-2 vehicles were modified by the Australian Army (RAEME) for use in South Vietnam from 1968 to 1971. The basic ARV’s had trackguards re-worked, fittings removed and protection added to allow the vehicles to operate in dense jungle. Extensive crew protection armour was added to the hull rear, and ACAV armour shields and additional weapons fitted for the commander and operator, hence the Australian Army South Vietnam (AASVN) designation …

A172
£12.00

A set of four 1/35th scale crowd control barriers in resin and etched brass. These interlocking galvanised steel barriers are typical in the UK, Northern Ireland (and elsewhere) for crowd control. Each barrier panel is 2”(52mm) wide x 1.5”(30mm) tall …

A176
£17.00

This 1/35th scale resin accessory set allows the detailing of the drivers position inside AFV Club Centurion kits. The all resin set designed by Rob Tearle includes side and rear bulkheads, drivers seat, controls and fittings and is suitable for all early marks of Centurion up to Mk-5. A detailed replacement roof panel is also included …

C104
£94.50

The Centurion ARV Mk-2 was the standard British Armoured Recovery Vehicle (ARV) from 1956 onwards and some served during the Gulf War of 1990/91 with the final vehicle leaving service in 1995. It’s flexibility, reliability, power and comprehensive recovery equipment made it one of the best ARV’s of it’s era. Most of these ARV’s were converted from gun tanks resulting in two distinct versions; with ‘long’ hull (Based on Centurion Mk-1/2) or ‘short’ hull (based on Centurion Mk-3/5). …

C093
£26.00

This 1/35th scale resin conversion by Jon Bottomley & Rob Tearle depicts the U.S.Army M4 Sherman Crocodile flamethrowing system as used in North West Europe in WW2. Four of these equipments were produced and issued to the HQ company of the U.S.Army 739th Tank Battalion and were used in combat in the closing weeks of WW2.The donor kits required comprise the Tamiya Churchill Crocodile (Trailer only) and the Tamiya M4 Sherman (in our studio example shown above), however …

A173
£14.00

A set of 6 1/35th scale resin cast concrete road barrier blocks. This set is suitable for use in the UK and Northern Ireland or anywhere as an improvised vehicle barriers for light non military vehicles …

MT011S
£13.00

These Micro Saw blades are produced in high quality 0.4mm stainless steel and are designed to fit the No-3 handle, which is included in this product. See below for other related products…..They are ideal for the precision cutting of plastics and wood, kits parts detail removing and precise hole cutting …

MT012S
£10.00

These Micro Saw blades are produced in high quality 0.25mm stainless steel and are designed to fit the No-3 handle, which is included in this product. Simply bend the tab over before fitting to the handle.They are ideal for the precision cutting of plastics, kits parts detail removing and precise hole cutting …

A171
£8.00

A set of two 1/35th scale Stop Checkpoint signs in etched brass with waterslide decals. This set is suitable for use in the UK and Northern Ireland …

K099
£40.00

The Humber Scout car is perhaps one of the best known vehicles of WW-II, and used in almost every British and commonwealth unit HQ, captured examples were also prized by the German Army …