AA products

Highly accurate scale model kits, conversions, accessories and much more! All products are supplied in kit form with instructions (if required) and require building, finishing and painting by the customer. We can supply contact details for an experienced UK based model-maker to assist customers should that be required.

W03
£105.50

On the 2nd of October 1944 a 13 tonne V2(A4) Missile rose from the giant Peenemunde test stand-VII driven by the 56,000 lb thrust motor to an altitude of 84,000 feet. The missile impacted near its’ target 180km (112 miles) away 5-minutes later at a speed of 2,600 feet/second (1772 mph).The V2 was the most significant technical achievement of the “Rocket team” lead by Dr Werner Von Braun, and paved the way for modern ICBM systems, satellite launchers, and the

W02
£158.00

The Fi-103 ‘Hellhound’ (V1) was designed as a low cost weapon, and was armed with a 1000kg warhead, and powered by a kerosine burning Argus ram jet engine. This engine only works once the V1 is accelerated to over 200 m.p.h.For ground launching the ‘ramp’ is actually a gigantic steam catapult, designed by the Walther company, and uses the explosive mixing of chemicals to generate high pressure steam. This catapult is capable of accelerating the 2 tonne V1

W01E
£63.50

The V1 and catapult are described in product codes W01 & W02 and this 1/35th scale model by Derek Hansen consists of set of 3 catapult sections, muzzle brake and support legs and walkway to extend the display catapult (W01) up to a 6 section firing length model the same size as (W02). So W0

W01
£105.50

The Fi-103 ‘Hellhound’ (V 1) was designed as a low cost weapon, and was armed with a 1000kg warhead, and powered by a kerosine burning Argus ram jet engine. This engine only works once the V1 is accelerated to ove

U002
£4.50

Make your FV432 Series vehicle better, with the inclusion of hi-tech laser cut headlamp guards. These replace the original combination of resin/plastic and etched brass on either Accurate Armour or Takom kits and are simply cut out from the frame and applied to the model with the centre web provided. The guards are perfect in scale, thickness and shape. All Accurate Armour FV432 kits made from October 2013 have these included as standard, this update set is for kits bought

U001
£4.50

The best Stalwart kits just got better, with the inclusion of hi-tech laser cut headlamp guards. These replace the original combination of resin and etched brass and are simply cut out from the frame and applied to the model using the spacers and bolt details provided. The guards are perfect in scale, thickness and shape.All Stalwart kits made from August 2013 have these included as standard, this update set is for kits bought prior t

T72
£15.00

Replacement 1/35th scale semi-flexible resin track for replacing the ‘rubber band’ or poorly detailed injection moulded track supplied with many model kits.The set contains moulded lengths to fit the Bronc

T70
£15.00

Replacement 1/35th scale semi-flexible resin track for replacing the ‘rubber band’ or poorly detailed injection moulded track supplied with many model kits. The set contains moulded lengths based on our normal Centurion steel track (T64).The IDF found that over very the very bad ground of the Golan region Centurion track tended to get the outer ‘spud’ edges bent upwards, making removal of the track pins a problem. It became common practice to cut off the ends of every

T69
£15.00

Replacement 1/35th scale semi-flexible resin track for replacing the ‘rubber band’ or poorly detailed injection moulded track supplied with many model kits. The set will contain moulded lengths, or links depending on the actual vehicle type with some

T68
£15.00

Replacement 1/35th scale semi-flexible resin track for replacing the ‘rubber band’ or poorly detailed injection moulded track supplied with many model kits.The set will contain moulded lengths, or links depending on the actual vehicle type with some extra links. This set includes resin sprockets and adaptor rings for the Trumpeter Challenger-2

T67
£15.00

Replacement 1/35th scale semi-flexible resin track for replacing the ‘rubber band’ or poorly detailed injection moulded track supplied with many model kits. The set will contain moulded lengths, or links depending on the actual vehicle type with some

T66
£15.00

Replacement 1/35th scale semi-flexible resin track for replacing the ‘rubber band’ or poorly detailed injection moulded track supplied with many model kits. The set will contain moulded lengths, or links depending on the actual vehicle type with some

T65
£15.00

Replacement 1/35th scale semi-flexible resin track for replacing the ‘rubber band’ or poorly detailed injection moulded track supplied with many model kits. The set will contain moulded lengths, or links depending on the actual vehicle type with some

T64
£15.00

Replacement 1/35th scale semi-flexible resin track for replacing the ‘rubber band’ or poorly detailed injection moulded track supplied with many Centurion model kits, such as Tamiya, Academy or Legends etc. This set contains lengths of pre-assembled links.If you are making an Israeli Centurion, or Centurion variant you may with to consider our IDF modified set T70 ‘Golan’ track a

T63
£15.00

Replacement 1/35th scale semi-flexible resin track for replacing the ‘rubber band’ or poorly detailed injection moulded track supplied with many model kits. The set will contain moulded lengths, or links depending on the actual vehicle type with some

T62
£15.00

Replacement 1/35th scale semi-flexible resin track for replacing the ‘rubber band’ or poorly detailed injection moulded track supplied with many model kits. The set will contain moulded lengths, or links depending on the actual vehicle type with some extra links. This set includes replacement resi

T61
£15.00

Replacement 1/35th scale semi-flexible resin track for replacing the ‘rubber band’ or poorly detailed injection moulded track supplied with many model kits. The set will contain moulded lengths, or links depending on the actual vehicle type with some

T60
£15.00

Replacement 1/35th scale semi-flexible resin track for replacing the ‘rubber band’ or poorly detailed injection moulded track supplied with many model kits. This set includes resin lengths, links, sprockets and spare turret mounted link plates. Suitable for all Post War Pershing s