Devcon 2-Part Epoxy is a great glue for very large parts where it would be impractical to use superglue. Also handy for constructing diorama bases etc.
Zap CA Very Thin superglue is great for highly detailed parts where feeding glue in to an assembled join is required. This 14.1g bottle comes with a fine nozzle and an even finer flexible tube nozzle.Cures in 4 seconds
Login or Register to show your interest in this product becoming available again. Alternatively enter your email below:
Milliput Grey Fine filler is a two part epoxy filler with a multitude of uses not least for sculpting and filling in the modelling application. This grade is of particular use to figure sculptors due to its extremely fine grade.
Login or Register to show your interest in this product becoming available again. Alternatively enter your email below:
The Albion Alloys range of precision products are well known for quality. This range of brass rod from 0.2mm to 1.0mm are superbly produced with a great sheen, perfectly smooth and uniform along the 305mm lengths.
Select from the options for different sizes. All packs contain rods of 305mm length but the quantity reduces as the diameter of rod rises. Packs are described by Diameter/Quantity in pack.
ALBW-Large sizes Precision Brass Rod 1.3mm-3.0mm £5.75
The Albion Alloys range of precision products are well known for quality. This range of brass rod from 1.5mm to 3.0mm are superbly produced with a great sheen, perfectly smooth and uniform along the 305mm lengths.
Select from the options for different sizes. All packs contain rods of 305mm length but the quantity reduces as the diameter of rod rises. Packs are described byDiameter/Quantity in pack.
The Albion Alloys range of precision products are well known for quality. This range of round aluminium tubes from 1.0mm to 5.0mm are superbly produced with a great sheen, perfectly smooth and uniform along the 305mm lengths and very satisfyingly all telescope inside each other with a very smooth slide fit. Perfect for replacing kit hydraulic rams where of course, the shaft can be polished to simulate chrome and the model could potentially be working.
Select from the options for different sizes. All packs contain rods of 305mm length but the quantity reduces as the diameter of tube rises. Packs are described byDiameter/Quantity in pack.
The all purpose adhesive from UHU for all gereral modelling and diorama uses. It can be used as a contact or general use adhesive. This is the large 125ml Tube (not the tiny blister packed effort on sale in most shops!).
We also have the Balsa and Styrene versions in stock too.
Login or Register to show your interest in this product becoming available again. Alternatively enter your email below:
The special version of the adhesive from UHU for porous surfaces (particularly Balsa) and diorama uses. This is the large 125ml Tube (not the tiny blister packed effort on sale in most shops!).
We also have the General use and Styrene versions in stock too.
The special version of the adhesive from UHU for Polystyrene and Styrofoam materials which are ideal for building up diorama landscapes. Sold as a 40g tube.
We also have the General use and Balsa versions in stock too.
Vallejo MODEL Air paint is a water based non-toxic non-flammable acrylic designed for application by Airbrush with no further diluting. Each colour comes in a 17ml plastic bottle with eye dropper top for easy application.
All 96 Colours and varnishes can be easily mixed and diluted using VMD thinner/dilutant.
To order, select the colour from the drop-down, add a quantity then add to basket.
A free MODEL Air colour chart is available from us with any order, just ask for one in the contact form.
Vallejo MODEL Color paint is a water based non-toxic, non-flammable acrylic designed for application by brush. Each colour comes in a 17ml plastic bottle with eye dropper top for easy application.
All 120 Colours and varnishes can be easily mixed and diluted using VMD thinner/dilutant. They may also be diluted for spray application.
To order, select the colour from the drop-down, add a quantity then add to basket.
A free MODEL Color colour chart is available from us with any order, just ask for one in the order comments box.
Vallejo MODEL Color Surface Primer is a water based non-toxic, non-flammable acrylic designed for application by brush. Each colour comes in a 17ml plastic bottle with eye dropper top for easy application.
All 13 Primer Colours can be easily mixed and diluted using VMD thinner/dilutant. They may also be diluted for spray application and form an ideal base coat for further coats/camouflage or weathering effects.
To order, select the colour from the drop-down, add a quantity then add to basket.
Add a few drops of Vallejo Paint Retarder (597) mixed with acrylic paint to slow down the drying of the paint. This gives longer usable time when brush painting. Supplied in a 17ml dropper bottle for easy dispensing.
This value starter set contains one 60ml bottle of Plast-I-Weld clear welding adhesive (AL7112), a Touch-N-Flow Applicator (AL711) and handy filler bottle (AL715). This is the ideal set for the assembly of any styrene or ABS plastic injection model kit or scratchbuilding product.
Note:-This product is for plastic-to plastic welded bonding; for plastic-to-resin or plastic-to-metal a suitable Super-glue should be used for permanent fixing.
Vallejo Natural formulation Pigments can be used straight from the jar or mixed with water or varnishes to produce textures, staining, dirt, soil, and weathering effects on all models in all scales.These non-flammable and non-toxic powders are supplied in 30ml plastic jars.
Vallejo Airbrush Thinner is formulated specifically for Model Air (VMA) and liquid acrylic without loss of adhesion, resistance and consistency. Supplied in a 60ml plastic bottle with eye dropper top for easy application.
A free MODEL Color and MODEL Air colour chart is available from us with any order, just ask for one in the Contact form.
